Hours: M-F 9-5 Pacific Time. Quantity pricing available. Email:fogfactory@t2k.com
| BU-350 Bubble Machine American DJ | ||||||||||||||||||||
  |
• High output bubble machine-
creates hundreds of bubbles per minute • EZ-Access front fluid tank • High velocity fan • Up/Down bubble directional adjustment • Wands are fitted to make bubbles rise in the air • ON/OFF switch • Hanging bracket • Most types of bubble liquid acceptable • Dimensions (LxWxH): 14.75 x 9" x 11" / 375 x 230 x 279 mm • Weight: 10 Lbs. / 4.5 kgs Optional BT-350 timer remote sold separately |
$89.99 |
||||||||||||||||||
 |
Bubbles, bubbles and even more bubbles! • Extra High output bubble machine-creates hundreds of bubbles per minute • EZ-Access front fluid tank • High velocity fan • Specially designed bubble wands are fitted to make bubbles rise into the air • Dimensions: 10.25" 13.25" x 9" • Weight 14 Lbs. |
$129.95 Juice 1 gal $17.999 |
||||||||||||||||||
Master  |
The Bubble Master 2000 combines a detachable bubble projector and timer remote with LCD digital display, for maximum output and precise control.
|
$499.00 Fluid 1 gal $24.50 |
||||||||||||||||||
| Little Blizzard Snow Machine CITC | ||||||||||||||||||||
 |
The Little Blizzard Snow Machine produces non-toxic foam flakes which evaporate upon impact, creating an effect perfect for theater or audience participation. An adjustable blower determines how far snow travels. Output varies from flurries to a blizzard. The flake size adjustment creates 1/16" to 1/2" flakes. Includes XLR cable connector and 25' remote. Little Blizzard SP (soundproofed) available that is 76% quieter. A good studio fan is recommened for a realistic snow effect, but not necessary.
|
$895.00 | ||||||||||||||||||
| PF-1000 ROSCO | ||||||||||||||||||||
 |
The PF-1000 Pencil Fogger is essentially a fog system taken out of its boxed machine configuration and reassembled to meet special design needs. It is designed for remote, precise applications where the use of a standard fog machine is not practical. Atypical basic system consists of a separate Heat Exchanger Module, a Control Center and related tubing and wiring. The Heat Exchanger Module is approximately 9 (22.9 cm) long and 3 (7.5 cm) in diameter. This small size allows it to be affixed in many places a standard fog machine could not be used, such as in props and animated mannequins. The Control Center can be mounted on a wall or placed anywhere remote to the Heat Exchanger Module and fluid reservoir. The Control Center controls fog volume and on/off operation. Regulated compressed air can be introduced through the heat exchanger to add to the creation of punctuated effects. It con also be modified to allow activation through a lighting control board or a main control computer. A 15 (4.6 m) electrical cable links the Heat Exchanger Module with the Control Center. This cable carries power and the thermal sensing devices. A 15 (4.6 m) long, 1/8 nylon tube carries fog fluid from the reservoir through the Control Center to the Heat Exchanger Module. The system uses all standard Rosco Fog Fluids. |
|||||||||||||||||||